1,000 Bạn có thể đặt trước hàng ngay bây giờ
Số Lượng | Giá |
---|---|
1+ | US$9.200 |
5+ | US$8.050 |
10+ | US$6.670 |
20+ | US$5.980 |
50+ | US$5.520 |
Thông Tin Sản Phẩm
Tổng Quan Sản Phẩm
The DS1E-S-DC12V is a high reliability Single Side Stable with Ag + Au clad contact and SPDT contact configuration. Epoxy resin seals the parts and cut off the external atmosphere, thus enabling use in difficult environments. It can be used with automatic solder and automatic wash systems. Highly stable gold cladding on the contacts ensures that contact resistance changes little over time. Furthermore, the use of twin contacts, a configuration that performs with superior contact reliability, ensures extremely low contact failure rates even under low level loads. High-performance polarized magnetic circuits that utilize the energy of permanent magnets have made it possible to create relays with strong resistance to shock and vibration.
- High sensitivity type
- 2A/30VDC (resistive load) Nominal switching capacity
- 60W/125VA (resistive load) Maximum switching power
- 3A Maximum carrying current
- 10μA, 10mVDC Minimum switching capacity (reference value)
- 50mΩ Maximum initial contact resistance (by voltage drop 6VDC/1A)
- 100MΩ at 500VDC Minimum insulation resistance (initial)
Ứng Dụng
Signal Processing, Communications & Networking, Test & Measurement, Computers & Computer Peripherals, Audio, Industrial
Thông số kỹ thuật
12VDC
2A
Through Hole
Solder
30V
720ohm
SPDT
DS Series
Non Latching
-
Silver
No SVHC (23-Jan-2024)
Tài Liệu Kỹ Thuật (2)
Sản phẩm thay thế cho DS1E-S-DC12V
Tìm Thấy 1 Sản Phẩm
Pháp Chế và Môi Trường
Quốc gia nơi quy trình sản xuất quan trọng cuối cùng được thực hiệnNước xuất xứ:Japan
Quốc gia nơi quy trình sản xuất quan trọng cuối cùng được thực hiện
RoHS
RoHS
Chứng Nhận Chất Lượng Sản Phẩm