ADN4663BRZ-REEL7

ADN4663 is a dual, CMOS, low voltage differential signalling (LVDS) line driver. It features a flow-through pinout for easy PCB layout and separation of input and output signals. This device accepts low voltage TTL/CMOS logic signals and converts them to a differential current output of typically ±3.1mA for driving a transmission medium such as a twisted-pair cable. The transmitted signal develops a differential voltage of typically ±355mV across a termination resistor at the receiving end, and this is converted back to a TTL/CMOS logic level by a line receiver. This device and a companion receiver offer a new solution to high speed point-to-point data transmission, and a low power alternative to emitter-coupled logic (ECL) or positive emitter-coupled logic (PECL). It is used in application such as backplane data transmission, cable data transmission, clock distribution etc.

• ±15KV ESD protection on output pins
• Maximum operating frequency is 350MHz typical
• Flow-through pinout simplifies PCB layout
• Propagation delay is 0.8ns typical
• 3.3V power supply, differential pulse skew is 0.3ns typical
• ±355mV typical differential signalling
• Interoperable with existing 5V LVDS receivers
• Conforms to TIA/EIA-644 LVDS standard
• Operating industrial temperature is -40°C to +85°C
• Package style is 8-lead standard small outline [SOIC-N]

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party