ADUM6202ARWZ

ADUM6202ARWZ is a dual-channel digital isolator with isoPower®, an integrated, isolated dc-to-dc converter. This device eliminates the need for a separate, isolated dc-to-dc converter in low power, isolated designs. The iCoupler chip scale transformer technology is used to isolate the logic signals and for the magnetic components of the dc-to-dc converter. The result is a small form factor, total isolation solution. isoPower uses high frequency switching elements to transfer power through its transformer. It is approved by UL recognition 5000V rms for 1 minute per UL 1577, CSA Component Acceptance Notice #5A, VDE certificate of conformity, IEC 60747-5-2 (VDE 0884 Part 2):2003-01, VIORM = 846V peak, DIN V VDE V 0884-10 (VDE V 0884-10):2006-12, VIORM = 846V peak. Applications include RS-232/RS-422/RS-485 transceivers, industrial field bus isolation, isolated sensor interfaces, industrial PLCs.

• Number of inputs, VDD1 side is 0
• Number of inputs, VISO side is 2
• 1Mbps maximum data rate
• 100ns maximum propagation delay at 5V
• 40ns maximum pulse width distortion
• Load regulation is 1% typical at (IISO = 8mA to 72mA)
• Output ripple is 75mV p-p typical at (20MHz bandwidth, CBO = 0.1µF/10µF, IISO = 72mA)
• Output noise is 200mV p-p typical at (CBO = 0.1µF/10µF, IISO = 72mA)
• Switching frequency is 180MHz typical at (TA = 25°C)
• Ambient operating temperature range from -40°C to +105°C, 16-lead SOIC-W package

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party