MAX13083EESD+

The MAX13083EESD+ is a ±15KV ESD protected, fail-safe, hot swap, +5V RS485/RS422 transceiver in 14 pin NSOIC package. The fail-safe circuitry in this device features a logic high receiver output when receiver input is open or shorted. The receiver outputs a logic high if all transmitters on a terminated bus are disabled (high impedance) and a hot swap capability to eliminate false transitions on the bus during power-up or hot insertion. This device has slew rate limited drivers but allow transmit speed up to 500Kbps. It has a 1/8 unit load receiver input impedance which allows up to 256 transceivers on the bus.

• Supply voltage range from 4.5V to 5.5V
• Operating temperature range from -40°C to 85°C
• One driver and one receiver
• Full duplex communication
• True fail-safe receiver while maintaining EIA/TIA-485 compatibility
• Hot swap input structures on DE and RE(complimentary)
• Low current shutdown mode

Ứng Dụng

Communications & Networking, Sensing & Instrumentation, Security, Lighting, Industrial

Cảnh Báo

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party