MAX20046GTCA/V+

MAX20046GTCA/V+ is an automotive Hi-speed USB 2.0 protector. The device provides high-ESD and short circuit protection for the low-voltage internal USB data and USB power lines in automotive radio, navigation, connectivity, and USB hub applications. The short-circuit protection features include short-to-battery on the protected HVBUS, as well as short-to-HVBUS and short-to-battery on the protected HVD+ and HVD-. Short-to-GND and overcurrent protection are also provided on the protected HVBUS output to protect the internal BUS power rail from overcurrent faults. The device features high-ESD protection to ±15kV air gap and ±8kV contact on the protected HVBUS, HVD+, and HVD- outputs. The device features a 500mohm (max) USB power switch, and two low-on-resistance (RON), USB 2.0 data switches. This device also features an enable input, fault output, 9ms fault-recovery time, 1ms overcurrent-blanking time, and integrated overcurrent autoretry.

• Targeted features for optimized USB performance
• Robust for the automotive environment
• Tested to ISO 10605 and IEC 61000-4-2 ESD standards
• AEC-Q100 qualified, GPIO-selectable 23/45mA current limits
• Power-supply range (IN) from 3 to 3.6V
• BUS undervoltage lockout is 4.2V typ at VBUS falling, TA=+25°C
• Protection-recovery time is 9ms typ at HVBUS falling below VOV-BUS, TA=+25°C
• On-resistance flatness is 0.25ohm max at IL=40mA, VD=0V or 0.4V
• 12 TQFN-EP package
• Temperature range from -40°C to +105°C

Cảnh Báo

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party