MAX3490EESA+T

The MAX3490EESA+T is a 3.3V powered, ±15KV ESD protected true RS485/RS422 transceiver in 8 pin NSOIC package. This low power transceiver contains one driver and one receiver. The MAX3490E transmits at up to 12Mbps. It has enhanced ESD protection. All transmitter outputs and receiver inputs are protected to ±15KV using IEC 1000-4-2 air-gap discharge, ±8KV using IEC 1000-4-2 contact discharge and ±15KV using human body model. Driver is short circuit current limited and it is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high impedance state. The receiver input has a fail-safe feature that provides logic high output if both inputs are open circuit. The MAX3490E is used in EMI sensitive applications, integrated services, digital networks and packet switching.

• Supply voltage range from 3V to 3.6V
• Supply current of 1.1mA (DE = VCC, active-low RE = 0 or VCC)
• Operating temperature range from -40°C to 85°C
• Full duplex communication
• Operate from a single +3.3V supply and no charge pump is required
• Interoperable with +5V Logic
• Common mode input voltage range from -7V to +12V

Ứng Dụng

Communications & Networking, Industrial

Cảnh Báo

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party