RD-UAMP-SENSOR

RD-UAMP-SENSOR is a Sub-µA current sensor. It is a Kinetis K22F-based current measurement board running on FreeRTOS, for use with the Freedom development ecosystem or any other Arduino-like development boards. This reference design allows for nonintrusive interfacing between any MCU and 3.3V shield, and measurement of a large range of low currents (~60nA – 5mA). Multiple communication methods are available, including integration with Freedom Sensor Toolbox (CE).

• Kinetis K22-120MHz, cost effective, full-speed USB MCUs based on Arm® Cortex®-M4 Core
• MC34673 1.2A single-cell li-ion / li-polymer battery charger
• Plugs in-between any existing 3.3V MCU + shield solution without requiring any firmware changes
• Compatible uses the widely popular Arduino connector layout and pinout
• Embeds capacitive touch buttons and an LCD module to provide quick and easy access to a control menu
• High speed optimized processing pipeline enables acquisition at 88kSa/s
• I²C sensor emulation can be accessed through a standard I²C interface and virtual register map
• Embeds a header for connecting an off-the-shelf UART-to-Bluetooth module
• Enables creation of optimized communication channels using USB stack or through virtual serial port

Nội Dung

Reference design board, Anti-static bag, Quick start guide.