OPA549T

The OPA549T is a high-voltage/high-current Operational Amplifier, ideal for driving a wide variety of loads. This laser-trimmed monolithic integrated circuit provides excellent low-level signal accuracy and high output voltage and current. The OPA549T operates from either single or dual supplies for design flexibility. The input common-mode range extends below the negative supply. The OPA549 is internally protected against over-temperature conditions and current overloads. In addition, the OPA549 provides an accurate, user-selected current limit. Unlike other designs which use a power resistor in series with the output current path, the OPA549T senses the load indirectly. This allows the current limit to be adjusted from 0 to 10A with a resistor/potentiometer or controlled digitally with a voltage-out or current-out digital-to-analogue Converter (DAC). The enable/status (E/S) pin provides two functions.

• 8A Continuous and 10A peak high output current
• Wide output voltage swing
• Thermal shutdown and adjustable current limit protection
• Output disable control
• Thermal shutdown indicator
• 9V/µs High slew rate
• Control reference pin
• Green product and no Sb/Br

Ứng Dụng

Motor Drive & Control, Power Management, Test & Measurement, Signal Processing, Audio

Cảnh Báo

IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.