AD7298-1BCPZ

AD7298-1 is a 10bit, high-speed, low-power, 8-channel, successive approximation ADC. The part operates from a single 3.3V power supply and features throughput rates up to 1MSPS. The device contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 30MHz. This offers a programmable sequencer, which enables the selection of a preprogrammable sequence of channels for conversion. The device has an on-chip, 2.5V reference that can be disabled to allow the use of an external reference. The device offers a 4-wire serial interface compatible with SPI and DSP interface standards. This uses advanced design techniques to achieve very low power dissipation at high throughput rates.

• 8 single-ended inputs, channel sequencer functionality
• Maximum throughput rate is 1MSPS (fSCLK=20MHz for analogue voltage conversions, one cycle latency)
• Analog input range from 0V to 2.5V, specified for VDD of 2.8V to 3.6V
• Logic voltage VDRIVE=1.65V to 3.6V, power-down current is <lt/>10µA
• Reference input voltage range from 1 to 2.5V (VDD=2.8V to 3.6V, TA=-40 to +125°C)
• Typical signal-to-noise ratio (SNR) is 61.5dB (VDD=2.8V to 3.6V, TA=-40 to +125°C)
• Internal power-on reset, high speed serial interface SPI
• Minimum resolution is 10bits (VDD=2.8V to 3.6V, TA=-40 to +125°C)
• Temperature rating range from -40°C to +125°C
• 20-lead frame chip scale package [LFCSP-WQ]

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party