
| Nhà Sản Xuất | ANALOG DEVICES |
|---|---|
| Mã Số Linh Kiện Nhà Sản Xuất | ADXRS620BBGZ-RLSao chép |
| Thời gian giao hàng tiêu chuẩn của nhà sản xuất | 12 tuần |
| Mã Đặt Hàng | Loại cuộn theo nhu cầu4030135RL Cắt Băng4030135 |
| Mã sản phẩm của bạn | |
| Bảng Dữ Liệu Kỹ Thuật |
500 Bạn có thể đặt trước hàng ngay bây giờ
| Dạng Đóng Gói | Số Lượng | Đơn giá: | Tổng |
|---|---|---|---|
| Cắt Băng | 1 | US$76.720 | US$76.72 |
| Tổng Giá | US$76.72 | ||
| Số Lượng | Giá |
|---|---|
| 1+ | US$76.720 |
| 10+ | US$69.740 |
| 25+ | US$68.350 |
| 500+ | US$66.960 |
Thông Tin Sản Phẩm
| Nhà Sản Xuất | ANALOG DEVICES |
|---|---|
| Mã Số Linh Kiện Nhà Sản Xuất | ADXRS620BBGZ-RLSao chép |
| Thời gian giao hàng tiêu chuẩn của nhà sản xuất | 12 tuần |
| Mã Đặt Hàng | Loại cuộn theo nhu cầu4030135RL Cắt Băng4030135 |
| Bảng Dữ Liệu Kỹ Thuật | |
| Sensing Axis | Z |
| MEMS Sensor Output | Analogue |
| Sensing Range | ± 300°/s |
| Supply Voltage Min | 4.75V |
| Full Scale Rate Range | ± 300°/s |
| Supply Voltage Max | 5.25V |
| Sensor Case / Package | BGA |
| No. of Pins | 32Pins |
| Sensor Case Style | BGA |
| Output Interface | - |
| Sensitivity Typ | 6mV/°/s |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 105°C |
| Product Range | - |
| Qualification | - |
| SVHC | No SVHC (04-Feb-2026) |
Tổng Quan Sản Phẩm
ADXRS620 is a complete angular rate sensor (gyroscope) that uses the Analog Devices, Inc., surface-micromachining process to create a functionally complete and low cost angular rate sensor integrated with all required electronics on one chip. The manufacturing technique for this device is the same high volume BiMOS process that is used for high reliability automotive airbag accelerometers. The output signal, RATEOUT (1B, 2A), is a voltage that is proportional to angular rate about the axis normal to the top surface of the package. The output is ratiometric with respect to a provided reference supply. An external capacitor sets the bandwidth. Other external capacitors are required for operation. It is used in applications such as vehicle chassis rollover sensing, inertial measurement units, platform stabilization.
- Complete rate gyroscope on a single chip, Z-axis (yaw rate) response
- High vibration rejection over wide frequency, 2000g powered shock survivability
- Ratiometric to referenced supply, 5V single-supply operation
- Self-test on digital command, temperature sensor output
- Nonlinearity is 0.1% of FS typical
- Rate noise density is 0.05°/sec/√Hz typical at (TA ≤ 25°C)
- Bandwidth is 2500MHz typical
- Supply current is 3.5mA typical
- Operating temperature is -40°C to +105°C
- Package style is 32-lead ceramic ball grid array (CBGA)
Ghi chú
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
Thông số kỹ thuật
| Sensing Axis | Z |
|---|---|
| Sensing Range | ± 300°/s |
| Full Scale Rate Range | ± 300°/s |
| Sensor Case / Package | BGA |
| Sensor Case Style | BGA |
| Sensitivity Typ | 6mV/°/s |
| Operating Temperature Max | 105°C |
| Qualification | - |
| MEMS Sensor Output | Analogue |
|---|---|
| Supply Voltage Min | 4.75V |
| Supply Voltage Max | 5.25V |
| No. of Pins | 32Pins |
| Output Interface | - |
| Operating Temperature Min | -40°C |
| Product Range | - |
| SVHC | No SVHC (04-Feb-2026) |
Tài Liệu Kỹ Thuật (1)
Pháp Chế và Môi Trường
| Nước xuất xứ: Quốc gia nơi quy trình sản xuất quan trọng cuối cùng được thực hiệnNước xuất xứ: | Philippines Quốc gia nơi quy trình sản xuất quan trọng cuối cùng được thực hiện |
|---|---|
| Số Thuế Quan: | 85423990 |
| US ECCN: | 7A994 |
| EU ECCN: | NLR |
| Tuân thủ tiêu chuẩn RoHS: | Có RoHS |
| Tuân thủ tiêu chuẩn RoHS Phthalates: | Có RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| Tải xuống Chứng Nhận Chất Lượng Sản Phẩm | Chứng Nhận Chất Lượng Sản Phẩm |
| Trọng lượng (kg): | .000001 |
