LT1078IS8#TRPBF

LT1078 is a micropower, dual single supply, precision op-amp. This device is optimized for single supply operation at 5V. ±15V specification is also provided. Micropower performance of competing devices is achieved at the expense of seriously degrading precision, noise, speed and output drive specifications. The design effort of the LT1078 was concentrated on reducing supply current without sacrificing other parameters. The offset voltage achieved is the lowest on any dual nonchopper stabilized op-amp micropower or otherwise. Offset current, voltage and current noise, slew rate and gain bandwidth product are all two to ten times better than on previous micropower op-amps. The 1/f corner of the voltage noise spectrum is at 0.7Hz, at least three times lower than on any monolithic op-amp. Application includes battery or solar-powered systems, portable Instrumentation, remote sensor amplifier, satellite circuitry, micropower sample-and-hold, thermocouple amplifier, micropower filters.

• 39μA typical supply current per amplifier (VS = 5V, 0V, VCM = 0.1V, VO = 1.4V, TA = 25°C)
• 60μV typical input offset voltage (VS = 5V, 0V, VCM = 0.1V, VO = 1.4V, TA = 25°C)
• 0.05nA typical input offset current (VS = 5V, 0V, VCM = 0.1V, VO = 1.4V, TA = 25°C)
• 200KHz typical gain bandwidth product (fO ≤ 20KHz, VS = 5V, 0V, VCM = 0.1V, VO = 1.4V, TA = 25°C)
• 0.07V/μs typical slew rate ( AV = 1, VS = ±2.5V, VS = 5V, 0V, VCM = 0.1V, VO = 1.4V, TA = 25°C)
• 108dB typ common mode rejection ratio (VCM=0V to 3.5V, VS=5V, 0V, VCM=0.1V, VO=1.4V, TA = 25°C)
• 114dB typ power supply rejection ratio (VS = 2.3V to 12V, VS = 5V, 0V, VO = 1.4V, TA = 25°C)
• Single supply operation, input voltage range includes ground
• Output swings to ground while sinking current, no pull-down resistors needed
• 8 lead plastic SO package, operating temperature range from -40°C to 85°C

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party