LT6016MPMS8#TRPBF

LT6016MPMS8#TRPBF is a dual, 3.2MHz, 0.8V/µs, low power, Over-The-Top® precision op-amp with input offset voltage trimmed to less than 50µV. This amplifier operates on single and split supplies with a total voltage of 3V to 50V and draw only 315µA per amplifier. It is reverse battery protected, drawing very little current for reverse supplies upto 50V. The Over-The-Top® input stage of the device is designed to provide added protection in tough environments. The input common mode range extends from V– to V+ and beyond this amplifier operates with inputs up to 76V above V– independent of V+. Internal resistors protect the inputs against transient faults up to 25V below the negative supply. It can drive loads up to 25mA and are unity-gain stable with capacitive loads as large as 200pF. Application includes high side or low side current sensing, battery/power supply monitoring, 4mA to 20mA transmitters, high voltage data acquisition, battery/portable instrumentation.

• Input common mode range from V– to V– +76V, rail-to-rail input and output
• 315µA typical supply current per amplifier (TA = 25°C, VS = 5V)
• Supply voltage range from 3V to 50V (TA = 25°C, VS = 5V, VCM = VOUT = mid-supply)
• 0.75V/µs typical slew rate (∆VOUT = 3V, TA = 25°C, VS = 5V)
• 3.2MHz typical gain bandwidth product (fTEST = 100KHz, TA = 25°C, VS = 5V)
• 0.15ohm typical output impedance (∆IO = ±5mA, TA = 25°C, VS = 5V)
• Common mode input range from 0V to 76V (TA = 25°C, VS = 5V)
• 126dB typical supply rejection ratio (VS = ±1.65V to ±15V, TA = 25°C)
• ±2nA input bias current (0.25V <lt/> VCM <lt/> V+ – 1.75V, TA = 25°C, VS = 5V, VCM = VOUT = mid-supply)
• 8 lead plastic MSOP package, operating temperature range from -55°C to 150°C

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party