MAX17671FEVKIT#

Evaluation kit for the MAX17671 5V step-down converter and 3.3V linear regulator output voltage application. This is a fully assembled and tested circuit board that demonstrates the performance of the MAX17671F dual-output regulator integrating a high-efficiency, high voltage, fixed output voltage, synchronous step-down DC-DC converter and a high-PSRR, low-noise, fixed-output linear regulator. The EV kit is designed for a high efficiency solution and generates a 5V step-down converter output voltage and a fixed 3.3V linear regulator output voltage at load currents up to 150mA and 50mA, respectively. The EV kit features adjustable input undervoltage lockout, open-drain active-low RESET signal, hysteretic peak current-limit protection and external frequency synchronization. It is suitable for battery-powered equipment, high-voltage linear regulator replacement, HVAC and building control, industrial sensors and process control applications.

• 6.5V to 60V input-voltage range and peak efficiency of 90% for the step-down converter
• 70µA no-load supply current, 200KHz switching frequency
• Internal soft-start
• EN/UVLO input, resistor-programmable UVLO threshold
• MODE/SYNC pin to select PWM or PFM mode
• Open-drain active-low RESET output to monitor dual outputs
• External frequency synchronization
• Overcurrent and overtemperature protection

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party