MAX17692BEVKIT#

MAX17692B evaluation kit (EV kit) provides a proven design to evaluate the performance of the MAX17692B IC. This fully assembled and tested circuit is implemented using the MAX17692B, the No-Opto flyback converter with an integrated 76V nMOSFET available in a 12-pin TDFN package with an exposed pad. The IC data sheet provides a complete description of the part and should be read in conjunction with this EV kit data sheet prior to operating the EV kit. The MAX17692BEVKIT# EV kit output is configured for an isolated +5V and provides up to 0.65A of output current over 18V to 36V input range. The device switches at a 145kHz switching frequency. The EV kit regulates the output voltage within ±5% over line, load, and temperature by sensing the output voltage on the primary-side. The converter does not need an optocoupler for the isolated output voltage sensing.

• Compact design with high switching frequency (145kHz)
• 87% peak efficiency
• Resistor programmable input enable/UVLO protection
• External loop compensation with design flexibility
• 15ms soft-start time
• Temperature compensated output voltage over -40°C to +125°C operating temperature
• Provision to external clock synchronization and frequency dithering
• VCC overdrive to improve efficiency
• Minimum number of external components

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party