MAX3362EKA+T

MAX3362EKA+T is a low-power, high-speed transceiver for RS-485/RS-422 communication that operates from a single +3.3V power supply. This device contains one differential transceiver consisting of a line driver and receiver. This transceiver operates at data rates up to 20Mbps, with an output skew of less than 6ns. Driver and receiver propagation delays are guaranteed below 50ns. This fast switching and low skew make the device ideal for multidrop clock/data distribution applications. The output level is guaranteed at +1.5V with a standard 54ohm load, compliant with RS-485 specifications. This transceiver draws a 1.7mA supply current when unloaded or fully loaded with the drivers disabled. Additionally, this device has a low-power shutdown mode, reducing the supply current to 1μA. It is used in applications such as clock/data distribution, telecom equipment, security equipment, point-of-sale equipment, industrial controls.

• Common-mode voltage range from -7V to +12V, hot-swap feature
• Allows up to 256 transceivers on the bus, half-duplex operation
• Interoperable with +5V logic, operates from a single +3.3V supply
• Current limiting and thermal shutdown
• Supply current in normal operation is 1.7mA typical at (no load, DI = VCC or GND)
• Supply current in shutdown mode is 1µA typical at (DE = GND, RE = VCC)
• Driver propagation delay is 50ns maximum at (RL = 54ohm, CL = 50pF)
• Receiver propagation delay is 50ns maximum at (CL = 15pF, VCC = +3.3V and TA = +25°C)
• Operating temperature range from -40°C to +85°C
• 8-pin SOT23-8 package

Cảnh Báo

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party