MAXM17635EVKIT#

MAXM17635EVKIT# is a MAXM17635 evaluation kit (EV kit) which provide proven designs to evaluate the performance of MAXM17635 module. This module operates over a wide input range from 4.5V to 36V and delivers up to 2A output current. The MAXM17635 adjustable module is configured for a 12V output, delivering up to 2A. The module is configured to operate at a 1.8MHz switching frequency, over an 18V to 36V input range. The EV kits feature an adjustable input undervoltage lockout, adjustable soft-start, open-drain (active low)RESET signal, external frequency synchronization, and selectable mode of operation (PWM/PFM/DCM). Suitable for base station power supplies, distributed supply regulation, general-purpose point-of-load, high voltage single-board systems, industrial control power supplies and programmable logic controller applications.

• MAXM17635 offers high 92.5% efficiency (VIN = 24V, VOUT = 12V, IOUT = 1.8A)
• Enable/UVLO input, resistor-programmable UVLO threshold
• Selectable PWM, PFM, and DCM modes of operation
• Programmed 1ms soft-start time
• Provision to synchronize the modules to the external-clock source
• RESET(active low) outputs, with pullup resistor to the respective VCC
• Low-profile, surface-mount components
• Proven PCB layout
• Fully assembled and tested
• Complies with CISPR22(EN55022) Class B conducted and radiated emissions

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party