TMP01FSZ-REEL

TMP01FSZ-REEL is a temperature sensor that generates a voltage output proportional to absolute temperature and a control signal from one of two outputs when the device is either above or below a specific temperature range. Both the high/low temperature trip points and hysteresis (overshoot) band are determined by user-selected external resistors. It consists of a band gap voltage reference combined with a pair of matched comparators. The reference provides both a constant 2.5V output and a voltage proportional to absolute temperature (VPTAT) which has a precise temperature coefficient of 5mV/K and is 1.49V (nominal) at 25°C. It is used in applications such as over/under temperature sensor and alarm, board-level temperature sensing, temperature controllers, electronic thermostats, thermal protection, HVAC systems, industrial process control, remote sensors.

• Temperature-proportional voltage output, user-programmable temperature trip points
• User-programmable hysteresis, TTL/CMOS compatible
• 20mA open-collector trip point outputs, single-supply operation range from 4.5V to 13.2V
• Offset voltage is 0.25mV typical at (V+ = 5V, GND = OV, -40°C ≤ TA ≤ +85°C)
• Offset voltage drift is 3μV/°C typical at (V+ = 5V, GND = OV, -40°C ≤ TA ≤ +85°C)
• Temperature accuracy is ±10°C typical at (TA = 25°C, no load)
• Input bias current is 25nA typical at (V+ = 5V, GND = OV, -40°C ≤ TA ≤ +85°C)
• Supply current is 400μA typical at (unloaded, +V = 5V)
• Turn-on settling time is 25μs typical at (V+ = 5V, GND = OV, -40°C ≤ TA ≤ +85°C)
• Operating temperature range from -40°C to +85°C, 8-lead SOIC-N package

Ghi chú

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party