CA773 IP2X

CA773 IP2X is a CAT IV 1,000V voltage absence tester(VAT). The C.A 773 VAT is an essential tool for electricians to check that no voltage is present before working on any electrical installation connected to the network. The C.A 773's comprehensive Autotest checks the electrical circuits, the power supply, the displays and the condition of the measurement leads. Phase rotation measurement is practical, simple and quick with the 2-wire microprocessor system. Safety is ensured when testing Residual Current Device (RCD) tripping by means of a double control system; both hands are necessary to press the 2 buttons simultaneously. Audible and visual continuity testing is provided in compliance with Appendix B of the standard. The tester can also detect stray voltages and offers unipolar phase identification. The test probe and leads can be removed. The C.A 753 measurement accessory (optional) can be used for quick, easy testing of European and Schuko 2P+E power sockets.

• Voltage detection, LED display + backlit digital display: 12VAC ≤ U ≤ 1000VAC, 12VDC ≤ U ≤ 1400VDC
• Stray voltage detection
• Unipolar phase detection (a single contact)
• Two-pole phase-sequence testing with 2-wire method = a third hand is not required
• Continuity test with audible and visual indication (R <lt/> 100 ohm)
• Extended continuity test with visual indication for R <lt/> 0.5ohm to 2.999Kohm
• RCD trip test, full autotest, IP65 rating
• Complies with EN 61243-3 & IEC 61010 1000V CAT IV
• Climatic conditions: -15°C to +45°C (class N), battery life <gt/> 2,500 x 10s measurements
• Removable lead and test probe

Nội Dung

CA 773 IP2X, 1 operating manual in 5 languages, 2 x 1.5 V LR06/AA batteries, 1 set of IP2X removable test probes Ø 4mm, 1 hook and loop strap.