
| Nhà Sản Xuất | DFROBOT |
|---|---|
| Mã Số Linh Kiện Nhà Sản Xuất | SEN0257Sao chép |
| Thời gian giao hàng tiêu chuẩn của nhà sản xuất | 19 tuần |
| Mã Đặt Hàng | 4308257 |
| Được Biết Đến Như | GTIN UPC EAN: 6959420917853 |
| Mã sản phẩm của bạn | |
| Bảng Dữ Liệu Kỹ Thuật |
50 Bạn có thể đặt trước hàng ngay bây giờ
| Số Lượng | Giá |
|---|---|
| 1+ | US$17.500 |
Thông Tin Sản Phẩm
| Nhà Sản Xuất | DFROBOT |
|---|---|
| Mã Số Linh Kiện Nhà Sản Xuất | SEN0257Sao chép |
| Thời gian giao hàng tiêu chuẩn của nhà sản xuất | 19 tuần |
| Mã Đặt Hàng | 4308257 |
| Được Biết Đến Như | GTIN UPC EAN: 6959420917853 |
| Bảng Dữ Liệu Kỹ Thuật | |
| Accessory Type | Gravity Analog Water Pressure Sensor |
| For Use With | DFRobot DFRduino UNO v3.0 Boards |
| Product Range | - |
| SVHC | No SVHC (04-Feb-2026) |
Tổng Quan Sản Phẩm
SEN0257 is an analogue gravity water pressure sensor. This is a water pressure sensor that adopts DFRobot gravity 3-pin interface. It supports standard 5V voltage input and 0.5~4.5V linear voltage output. It is compatible with multiple Arduino controllers. Coordinate with a DFRobot gravity IO expansion shield, the water pressure sensor can be plugged into an Arduino board, wiring-free. Put it with solenoid valve, water turbine generator and other sensors, user can build a smart water control system. Briefly speaking, this water pressure sensor is a stethoscope to a water pipe. It will help user to diagnose whether there is water, and how strong the water pressure is. It can be widely applied to smart home control systems (SCS), Internet of Things (IoT), and device detections.
- Support water pressure detection of living environmental water systems (houses, gardens, farms)
- Support water pressure detection of the outdoor environments, such as rivers, lakes, and the sea
- Support water pressure detection of tanks
- Support liquid level detection in special situation detection in specified liquid
- Liquid/gas without corrosion medium, gravity-3Pin (Signal-VCC-GND) wiring
- Pressure measurement range from 0 to 1.6Mpa, +5V DC input voltage
- 0.5% to 1%FS (0.5%, 0~55°C) measurement accuracy range
- G1/4 threadably, G1/2 to G1/4 adapter, IP68 waterproof level
- Less than 2ms response time, 2.8mA quiescent current, 10’000’000 times service life
- Operating temperature range from -20 to 85°C
Thông số kỹ thuật
| Accessory Type | Gravity Analog Water Pressure Sensor |
|---|---|
| Product Range | - |
| For Use With | DFRobot DFRduino UNO v3.0 Boards |
|---|---|
| SVHC | No SVHC (04-Feb-2026) |
Tài Liệu Kỹ Thuật (1)
Pháp Chế và Môi Trường
| Nước xuất xứ: Quốc gia nơi quy trình sản xuất quan trọng cuối cùng được thực hiệnNước xuất xứ: | China Quốc gia nơi quy trình sản xuất quan trọng cuối cùng được thực hiện |
|---|---|
| Số Thuế Quan: | 90303370 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| Tuân thủ tiêu chuẩn RoHS: | Có RoHS |
| Tuân thủ tiêu chuẩn RoHS Phthalates: | Có RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| Tải xuống Chứng Nhận Chất Lượng Sản Phẩm | Chứng Nhận Chất Lượng Sản Phẩm |
| Trọng lượng (kg): | .11 |
