AT89C5131A-RDTUM

The AT89C5131A-RDTUM is a 1-chip 8-bit high-performance flash version of the 80C51 Microcontroller with full-speed USB functions. This device retains the features of the 80C52 and adds 1024 bytes of on-chip expanded ERAM, dual data pointer, 16-bit up/down timer, programmable counter array, up to four programmable LED current sources, programmable hardware watchdog and power-on reset. Two software-selectable modes of reduced activity further reduce power consumption. In the idle mode the CPU is frozen while the timers, serial ports and interrupt system operate. In the power-down mode the RAM is saved and the peripheral clock is frozen, but the device has full wake-up capability through USB events or external interrupts.

• 80C52X2 core (6 clocks per instruction)
• 16/32KB on-chip flash EEPROM in-system programming through USB
• 3KB flash EEPROM for bootloader
• 1kB EEPROM data - Byte and page (128 bytes) erase and write
• 1024-byte on-chip expanded RAM (ERAM)
• Integrated power monitor (POR/PFD) to supervise internal power supply
• USB 1.1 and 2.0 Full speed compliant module with interrupt on transfer completion
• 100ms to 3s at 8MHz programmable hardware watchdog timer (one-time enabled with reset-out)
• Keyboard interrupt interface on port P1 (8 bits)
• 400kBps TWI (two wire interface)
• Serial peripheral interface (SPI)
• 34 I/O pins
• 4 direct-drive LED outputs with programmable current sources (2-6-10mA typical)
• 4-level priority interrupt system (11 sources)
• Idle and power-down modes
• 0 to 24MHz on-chip oscillator with analogue PLL for 48MHz synthesis
• Industrial temperature range