MC14489BPE
Led Driver, 15 Outputs, Common Cathode, 4.5V-5.5V in, 4MHz switch, 5.4V/17.5mA out, DIP-20

| Nhà Sản Xuất | NXP |
|---|---|
| Mã Số Linh Kiện Nhà Sản Xuất | MC14489BPESao chép |
| Mã Đặt Hàng | 1457137 |
| Mã sản phẩm của bạn | |
| Bảng Dữ Liệu Kỹ Thuật |
Thông Tin Sản Phẩm
| Nhà Sản Xuất | NXP |
|---|---|
| Mã Số Linh Kiện Nhà Sản Xuất | MC14489BPESao chép |
| Mã Đặt Hàng | 1457137 |
| Bảng Dữ Liệu Kỹ Thuật | |
| Input Voltage Min | 4.5V |
| Input Voltage Max | 5.5V |
| IC Case / Package | DIP |
| No. of Pins | 20Pins |
| Output Voltage Max | 5.4V |
| Supply Voltage Min | 4.5V |
| Output Current Max | 17.5mA |
| Switching Frequency Typ | 4MHz |
| Supply Voltage Max | 5.5V |
| IC Mounting | Through Hole |
| Product Range | - |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 130°C |
| MSL | - |
| SVHC | No SVHC (17-Dec-2015) |
| Driver Case Style | DIP |
| No. of Outputs | 15Outputs |
| Switching Frequency | 4MHz |
Tổng Quan Sản Phẩm
The MC14489BPE is a multi-character LED Display/Lamp Driver which directly interfaces to individual lamps, 7-segment displays or various combinations of both. LEOs wired with common cathodes are driven in a multiplexed-by-5 fashion. Communication with an MCUIMPU is established through a synchronous serial port. The MC14489B features data retention plus decode and scan circuitry, thus relieving processor overhead. A single, current -setting resistor is the only ancillary component required. A special technique allows driving 5-1/2 digits. A configuration register allows the drive capability to be partitioned off to suit many additional applications. The on-chip decoder outputs 7-segment-format numerals 0 to 9, hexadecimal characters A to F, plus 15 letters and symbols. The MC14489B is compatible with the NXP SPI and National MI-CRO-WIRETM serial data ports.
- Current sources controlled by single resistor provide anode drive
- Low-resistance FET switches provide direct common cathode interface
- Low-power mode (extinguishes the LEDs) and brightness controlled via serial port
- Special circuitry minimizes EMI when display is driven and eliminates EMI in low-power mode
- Power-on reset (POR) blanks the display on power-up, independent of supply ramp up time
- May be used with double-heterojunction LEDs for optimum efficiency
Ứng Dụng
Industrial
Thông số kỹ thuật
| Input Voltage Min | 4.5V |
|---|---|
| IC Case / Package | DIP |
| Output Voltage Max | 5.4V |
| Output Current Max | 17.5mA |
| Supply Voltage Max | 5.5V |
| Product Range | - |
| Operating Temperature Max | 130°C |
| SVHC | No SVHC (17-Dec-2015) |
| No. of Outputs | 15Outputs |
| Input Voltage Max | 5.5V |
|---|---|
| No. of Pins | 20Pins |
| Supply Voltage Min | 4.5V |
| Switching Frequency Typ | 4MHz |
| IC Mounting | Through Hole |
| Operating Temperature Min | -40°C |
| MSL | - |
| Driver Case Style | DIP |
| Switching Frequency | 4MHz |
Tài Liệu Kỹ Thuật (3)
Sản Phẩm Liên Kết
Tìm Thấy 2 Sản Phẩm
Pháp Chế và Môi Trường
| Nước xuất xứ: Quốc gia nơi quy trình sản xuất quan trọng cuối cùng được thực hiệnNước xuất xứ: | United States Quốc gia nơi quy trình sản xuất quan trọng cuối cùng được thực hiện |
|---|---|
| Số Thuế Quan: | 85423990 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| Tuân thủ tiêu chuẩn RoHS: | Có RoHS |
| Tuân thủ tiêu chuẩn RoHS Phthalates: | Có RoHS |
| SVHC: | No SVHC (17-Dec-2015) |
| Tải xuống Chứng Nhận Chất Lượng Sản Phẩm | Chứng Nhận Chất Lượng Sản Phẩm |
| Trọng lượng (kg): | .002273 |
