OM11007

OM11007 is a LPC-COM-Board which can be used together with the LPC-Stick debugger system. It contains architecture and device specific information and all technical data of the system. The LPC-Stick is a specific debugger system being able to emulate the integrated LPC2468 microcontroller with on chip debug support. It provides a USB communication port for connecting the LPC-Stick to a PC. For operation, the overall system requires the LPC-Stick. The communication extension board provides a set of communication features and pin outs as well as an external power connector.

• 2 x 40 pin 0.635mm pitch PCB extension Stick I/O connector for the LPCStick
• 2 x 24 pin IO connector pads with reset and IRQ capability
• USB B connector with ESD protection IP4220CZ6
• USB A connector with Power Controller LM3526M-L
• RS232 driver chip MAX3232ECDB
• Ethernet Phy with RMII interface DP83848CVV
• CAN physical driver chip TJA1050T
• USB powered via stick or from external USB B or IO connector with jumper selection

Ứng Dụng

Industrial, Medical, Communications & Networking

Cảnh Báo

Do not supply external power to the LPC-COM-Board via the pads or the USB B connector while the stick is connected to the PC. This may cause serious damage to PC.