INN3870C-H801-TL

InnoSwitch™3-PD dramatically simplifies development and manufacturing of USB-PD power supplies by integrating primary switch and controller, isolated feedback, secondary control and USB-PD controller into a single package. It has configurable pull-up resistor Rp, on-chip temperature sensor, telemetry for power supply status and fault monitoring, PowiGaN™ technology (up to 100W without heat sinks) and dedicated NTC pin for temperature sense. Applications include high efficiency USB PD 3.0 + PPS adapters for smart phones, tablets, notebooks, digital cameras and Bluetooth accessories, quick charge protocol based power adapters, direct-charge mobile device chargers. It features advanced protection / safety features such as input voltage monitoring with accurate brown-in/brown-out and overvoltage protection, output OV/UV fault detection with independently configured responses, open SR FET gate detection, hysteretic thermal shutdown, programmable watchdog timer for system faults.

• 90W (adapter), 100W (open frame) at 230VAC±15%/75W (adapter), 85W (open frame) at 85-265V O/P power
• USB Type C and PD controller, compliant with USB Type-C Rev. 1.3
• USB Power Delivery 3.0 + PPS provider and QC4 support
• Integrated VCONN FETs with soft start/overcurrent protection, supports electronically marked cables
• Highly integrated, compact footprint, optimized efficiency across line and load range
• Multi-mode quasi-resonant/DCM/CCM flyback controller, high-voltage switch, secondary-side sensing
• Synchronous rectifier driver, EcoSmart™ energy efficient, no-load consumption of 14mW
• Enables power supply designs that easily comply with all global energy efficiency regulations
• 100% production HIPOT compliance testing, compliant with UL1577 and TUV (EN60950)
• Reinforced insulation, isolation voltage <gt/>4000VAC, low heat dissipation