Bạn cần thêm?
Số Lượng | Giá |
---|---|
1+ | US$6.950 |
10+ | US$4.960 |
25+ | US$4.840 |
50+ | US$4.710 |
100+ | US$4.580 |
250+ | US$4.450 |
500+ | US$4.320 |
Thông Tin Sản Phẩm
Tổng Quan Sản Phẩm
The X9C104SZ is a Digitally Controlled Potentiometer consists of a resistor array, wiper switches, a control section and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D and INC inputs. The position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications.
- Solid-state potentiometer
- 99 Resistive elements - Temperature compensated
- Low power CMOS - 3mA Maximum active current and 750µA maximum standby current
- High reliability - 100000 Data changes per bit endurance
Ứng Dụng
Signal Processing, Automation & Process Control
Thông số kỹ thuật
100kohm
3 Wire, Serial
± 20%
5.5V
8Pins
± 300ppm/°C
70°C
-
No SVHC (21-Jan-2025)
Single
Linear
4.5V
SOIC
100
0°C
Single 100-Tap Non-Volatile Digital Pots
-
Tài Liệu Kỹ Thuật (3)
Sản phẩm thay thế cho X9C104SZ
Tìm Thấy 1 Sản Phẩm
Sản Phẩm Liên Kết
Tìm Thấy 1 Sản Phẩm
Pháp Chế và Môi Trường
Quốc gia nơi quy trình sản xuất quan trọng cuối cùng được thực hiệnNước xuất xứ:Thailand
Quốc gia nơi quy trình sản xuất quan trọng cuối cùng được thực hiện
RoHS
RoHS
Chứng Nhận Chất Lượng Sản Phẩm