STEVAL-LNBH02

The STEVAL-LNBH02 is a power supply evaluation board for LNB based on the LNBH25S. This evaluation board implements a DC-DC converter based on the LNBH25S device. It is used to power LNBs inside dish antennas to receive satellite TV signals. The LNBH25S is an integrated solution for supplying / interfacing satellite LNB modules in accordance with international standards. It is a simple and complete solution for dual tuner satellite receivers and provides high performance at low cost with a low external component count. The LNBH25S evaluation board includes an I²C bus interface and an internal 22KHz tone generator which is factory trimmed and can be controlled by the DSQIN pin (TTL compatible) allowing immediate DiSEqC data encoding.

• Complete interface between LNB and I²C bus
• Built-in DC-DC converter for single 12V supply operation and high efficiency (typ. 93% at 0.5A)
• Selectable output current limit by external resistor
• Compliant with main satellite receivers output voltage specification (15 programmable levels)
• Accurate built-in 22KHz tone generator suits widely accepted standards
• 22KHz tone waveform integrity guaranteed also at no load condition
• Low drop post regulator, high efficiency step-up PWM with integrated power N-MOS for low power loss
• LPM function (low power mode) to reduce dissipation
• Overload and overtemperature internal protection with I²C diagnostic bits
• LNB short-circuit dynamic protection, ±4KV ESD tolerant on output power pins

Ứng Dụng

Power Management