285-139

285-139 is a 285 series high-current terminal block set. This three-phase set is designed for seamless electrical installations. Strip lengths must be 25mm when connecting conductors to this three-phase set. Featuring conductor terminals along with a POWER CAGE CLAMP, this connector outperforms the competition. The POWER CAGE CLAMP is a reliable, maintenance-free, and universal way to connect large conductor cross-sections. The clamping point can be locked open and users do not need to use a torque wrench or prepare the conductor in any way, e.g., by crimping the ferrule. This three-phase set is suitable for conductor cross sections ranging from 6mm² to 35mm².

• 1000V nominal voltage (III) per IEC/EN
• 8kV rated impulse withstand voltage (III) per IEC/EN
• 10 clamping units, 5 number of potentials
• 35mm² nominal cross-section
• 80mm width, 86mm height, 63mm depth from upper-edge of DIN-rail
• Polyamide (PA66) insulation material (main housing)
• Continuous operating temperature range from -60 to +105°C

Nội Dung

Blue 2-conductor through terminal block (1 piece), Gray 2-conductor through terminal block (3-piece), Green-yellow 2-conductor ground terminal block (1-piece).